uPVC Pipe & Accessories
Cost effective and resource efficient uPVC Pipes available with exceptional toughness, long term performance and hydraulic capacity.
Quality Control for Quality Product
Test the pressure for short time and long time
Test for the press resistence
Test for the changes in high temperature
| °C | PVC 5 MPa (kgf/cm²) | PVC 8.5 MPa (kgf/cm²) | PVC 13.5 MPa (kgf/cm²) |
|---|---|---|---|
| 20 | 0.58(5.91) | 0.98(9.99) | 1.57(16.01) |
| 20 | 0.50(5.10) | 0.85(8.67) | 1.35(13.77) |
| 30 | 0.47(4.79) | 0.79(8.06) | 1.25(12.75) |
| Nominal Size | Mean Outside Diameter (mm) | (Min) Wall Thickness (mm) |
|---|---|---|
| 32 | 36.2 | 2.1 |
| 40 | 42.8 | 2.3 |
| 50 | 55.7 | 2.4 |
| 65 | 68.7 | 2.7 |
| 80 | 82.3 | 3.0 |
| 100 | 110.0 | 3.2 |
| 125 | 140 | 3.7 |
| 150 | 160.0 | 4.0 |
| Nominal Size | Mean Outside Diameter (mm) | (Min) Wall Thickness (mm) |
|---|---|---|
| 1¼ | 36.2 | 2.1 |
| 1½ | 42.8 | 2.3 |
| 2 | 55.7 | 2.4 |
| 2½ | 55.7 | 2.7 |
| 3 | 82.3 | 3.0 |
| 4 | 110.0 | 3.2 |
| 5 | 140.0 | 3.7 |
| 6 | 160.0 | 4.0 |
| Nominal Size | OD | (Thickness) | ||
|---|---|---|---|---|
| UPVC 5 | UPVC 8.5 | UPVC 13.5 | ||
| 18(½″) | 22 ± 0.15 | - | 2.0 ± 0.20 | 2.5 ± 0.20 |
| 20(¾″) | 26 ± 0.15 | - | 2.0 ± 0.20 | 2.5 ± 0.20 |
| 25(1″) | 34 ± 0.15 | - | 2.0 ± 0.20 | 3.0 ± 0.25 |
| 35(1¼″) | 42 ± 0.15 | 1.5 ± 0.15 | 2.0 ± 0.20 | |
| 40(1½″) | 48 ± 0.15 | 1.5 ± 0.15 | 2.3 ± 2.0 | 3.5 ± 0.25 |
| 40(1½″) | 1.5 ± 0.15 | 1.5 ± 0.15 | 1.5 ± 0.15 | 1.5 ± 0.15 |
| 40(1½″) | 1.5 ± 0.15 | 1.5 ± 0.15 | 1.5 ± 0.15 | 1.5 ± 0.15 |
| 40(1½″) | 1.5 ± 0.15 | 1.5 ± 0.15 | 1.5 ± 0.15 | 1.5 ± 0.15 |
| 40(1½″) | 1.5 ± 0.15 | 1.5 ± 0.15 | 1.5 ± 0.15 | 1.5 ± 0.15 |
| 40(1½″) | 41.5 ± 0.15 | 1.5 ± 0.15 | 1.5 ± 0.15 | 1.5 ± 0.15 |
| 40(1½″) | 1.5 ± 0.15 | 1.5 ± 0.15 | 1.5 ± 0.15 | 1.5 ± 0.15 |
| 40(1½″) | 1.5 ± 0.15 | 1.5 ± 0.15 | 1.5 ± 0.15 | 1.5 ± 0.15 |
| 40(1½″) | 40(1½″) | 1.5 ± 0.15 | 1.5 ± 0.15 | 1.5 ± 0.15 |
| 40(1½″) | 1.5 ± 0.15 | 1.5 ± 0.15 | 1.5 ± 0.15 | 1.5 ± 0.15 |
| 40(1½″) | 1.5 ± 0.15 | 1.5 ± 0.15 | 1.5 ± 0.15 | 1.5 ± 0.15 |
| 40(1½″) | 1.5 ± 0.15 | 1.5 ± 0.15 | 1.5 ± 0.15 | 1.5 ± 0.15 |
| 40(1½″) | 1.5 ± 0.15 | 1.5 ± 0.15 | 1.5 ± 0.15 | 1.5 ± 0.15 |
| 40(1½″) | 1.5 ± 0.15 | 1.5 ± 0.15 | 1.5 ± 0.15 | 1.5 ± 0.15 |
| 40(1½″) | 1.5 ± 0.15 | 1.5 ± 0.15 | 1.5 ± 0.15 | 1.5 ± 0.15 |
| 40(1½″) | 1.5 ± 0.15 | 1.5 ± 0.15 | 1.5 ± 0.15 | 1.5 ± 0.15 |
| Nominal Size (mm) | Mean Outside diameter* (mm) | (Min) Wall Thickness AW/VP (mm) | AE/Vu (mm) |
|---|---|---|---|
| 13 | 18 | 2.2 | |
| 16 | 22 | 2.7 | |
| 20 | 26 | 2.7 | |
| 25 | 32 | 3.1 | |
| 30 | 38 | 3.1 | |
| 40 | 48 | 3.6 | 1.8 |
| 50 | 60 | 4.1 | 1.8 |
| 65 | 76 | 4.1 | 2.2 |
| 75 | 89 | 5.5 | 2.7 |
| 100 | 114 | 6.6 | 3.1 |
| 125 | 140 | 7.0 | 4.1 |
| 150 | 165 | 8.9 | 5.1 |
| 200 | 216 | 10.3 | 6.5 |
| 250 | 267 | 12.7 | 7.8 |
| 300 | 318 | 15.1 | 9.2 |
| 350 | 370 | - | 10.5 |
| 400 | 420 | - | 11.8 |
| 450 | 470 | - | 13.2 |
| 500 | 520 | - | 14.6 |
| 600 | 630 | - | 17.8 |
| 700 | 732 | - | 21.0 |
| Nominal Size Inches | Mean Outside Diameter (mm) | Wall Thickness(Minium) | ||||
|---|---|---|---|---|---|---|
| Class O non-pressure (mm) | Class B 0.6mpa (mm) | Class C 0.9mpa (mm) | Class D 1.2mpa (mm) | Class E 1.5mpa (mm) | ||
| ⅜ | 17.0 | 1.5 | ||||
| ½ | 21.2 | 1.7 | ||||
| ¾ | 26.6 | 1.9 | ||||
| 1 | 33.4 | 2.2 | ||||
| 1¼ | 42.1 | 2.2 | 2.7 | |||
| 1½ | 48.1 | 1.8 | 2.5 | 3.1 | ||
| 2 | 60.2 | 1.8 | 2.5 | 3.1 | 3.9 | |
| 2½ | 75.0 | 1.8 | 3.0 | 3.9 | 4.8 | |
| 3 | 88.7 | 1.8 | 2.9 | 3.5 | 4.6 | 5.7 |
| 4 | 114.1 | 2.3 | 3.4 | 4.5 | 6.0 | 7.3 |
| 5 | 140.0 | 2.6 | 3.8 | 5.5 | 7.3 | 9.0 |
| 6 | 168.0 | 3.1 | 4.5 | 6.6 | 8.8 | 10.8 |
| 8 | 218.8 | 3.1 | 5.3 | 7.8 | 10.3 | 12.6 |
| 9 | 244.1 | 3.1 | 5.9 | 8.7 | 11.5 | 14.1 |
| 10 | 272.6 | 3.1 | 6.6 | 9.7 | 12.8 | 15.7 |
| 12 | 323.4 | 3.1 | 7.8 | 11.5 | 15.2 | 18.7 |
End Socket
Rubber Ring End Socket