uPVC Hose
Cost effective and resource efficient uPVC Pipes available with exceptional toughness, long term performance and hydraulic capacity.
Features
- No elongation observed at time of pressure increase due to wrap reinforcement.
- No separation of piles.
- Easy to fit coupling.
- Light weight and simple to use.
- Burst pressure designed 4-5 times of normal pressure.
- Elongation especially in case of elevated temperature is less than ½ of competitive products.
Suction Hose For General Purpose
| Size | Inner Diameter (I.D) (mm) | Outer Diameter (O.D) (mm) | Standard Length (m) | Working Pressure (kgf/cm²) (at 20°C) | Burst Pressure (kgf/cm²) (at 20°C) |
|---|---|---|---|---|---|
| ∅ 8.5 | 8.5 ± 0.2 | 14.7 | 100 | 35 | 140 |
| ∅ 9 | 9.0 ± 0.3 | 16.2 | 100 | 28 | 115 |
| ∅ 12 | 12.0 ± 0.3 | 19.6 | 100 | 20 | 84 |
| ∅ 19 | 19.0 ± 0.5 | 27.6 | 100 | 18 | 73 |
| ∅ 25 | 25.0 ± 0.5 | 34.6 | 100 | 15 | 61 |
| Size | Inner Diameter (I.D) (mm) | Outer Diameter (O.D) (mm) | Standard Length (m) | Working Pressure (kgf/cm²) (at 20°C) | Burst Pressure (kgf/cm²) (at 20°C) |
|---|---|---|---|---|---|
| ∅ 6 | 6 ± 0.3 | 10.8 ± 0.3 | 100 | 13.5 | 55 |
| ∅ 8 | 8 ± 0.3 | 13.2 ± 0.3 | 100 | 13.5 | 55 |
| ∅ 9 | 9 ± 0.3 | 14.6 ± 0.3 | 100 | 12.5 | 50 |
| ∅ 10 | 10 ± 0.3 | 15.6 ± 0.3 | 100 | 12.0 | 48 |
| ∅ 12 | 12 ± 0.3 | 17.6 ± 0.3 | 100 | 10.5 | 43 |
| ∅ 15 | 15 ± 0.5 | 21.6 ± 0.5 | 50 | 9.0 | 36 |
| ∅ 19 | 19 ± 0.5 | 25.6 ± 0.5 | 50 | 9.0 | 36 |
| ∅ 25 | 25 ± 0.5 | 32.6 ± 0.5 | 50 | 8.0 | 32 |
| ∅ 32 | 32 ± 0.7 | 40.6 ± 0.7 | 50 | 6.5 | 26 |
| ∅ 38 | 38 ± 0.7 | 47.6 ± 0.7 | 50 | 5.0 | 20 |
| ∅ 50 | 50 ± 0.8 | 61.0 ± 0.8 | 50 | 5.0 | 20 |
| Size | Inner Diameter (I.D) (mm) | Outer Diameter (O.D) (mm) | Working Pressure (kgf/cm²) | Burst Pressure (kgf/cm²) | Minimum Bending Radius (mm) |
|---|---|---|---|---|---|
| ∅ 25 | 25.0 ± 0.7,0.5; | 32.0 | 4.5 | 19.0 | 80 |
| ∅ 32 | 32 ± 0.7,0.5 | 39.0 | 4.5 | 19.0 | 80 |
| ∅ 38 | 38.1 ± 1.0,0.5 | 45.1 | 4.5 | 18.0 | 125 |
| ∅ 50 | 50.8 ± 1.0,0.5 | 59.6 | 4.5 | 18.0 | 170 |
| ∅ 65 | 63.5 ± 1.5,0.5 | 72.5 | 3.5 | 15.0 | 220 |
| ∅ 75 | 76.2 ± 1.5,0.5 | 86.2 | 3.0 | 13.0 | 250 |
| ∅ 90 | 89.0 ± 2.0,0.5 | 99.8 | 3.0 | 12.0 | 320 |
| ∅ 100 | 101.6 ± 2.0,0.5 | 114.6 | 3.0 | 12.0 | 450 |
| ∅ 125 | 127.0 ± 2.0,0.5 | 140.0 | 2.0 | 9.0 | 720 |
| ∅ 150 | 151.0 ± 2.5,0.5 | 166.0 | 2.0 | 8.0 | 1200 |
| ∅ 200 | 203.0 ± 2.5,1.0 | 223.0 | 1.5 | 6.0 | 1500 |
| ∅ 250 | 254.0 ± 2.5,1.0 | 274.0 | 1.2 | 5.0 | 2200 |
| ∅ 300 | 304.8 ± 3.0 | 328.8 | 0.7 | 3.0 | 3000 |
| Size | Inner Diameter (I.D) (mm) | Outer Diameter (O.D) (mm) | Working Pressure (kgf/cm²) | Burst Pressure (kgf/cm²) | Minimum Bending Radius (mm) |
|---|---|---|---|---|---|
| ∅ 25 | 25.0 ± 0.3 | 33.5 | 3.0 | 1.3 | 50 |
| ∅ 32 | 32 ± 0.5 | 42.4 | 2.5 | 11 | 50 |
| ∅ 38 | 38.1 ± 0.5 | 48.6 | 2.5 | 11 | 55 |
| ∅ 40 | 41.3 ± 0.7 | 52.3 | 2.5 | 11 | 60 |
| ∅ 45 | 45.0 ± 0.7 | 56.8 | 2.5 | 10 | 80 |
| ∅ 50 | 50.8 ± 0.8 | 62.8 | 2.5 | 10 | 95 |
| ∅ 65 | 63.5 ± 0.8 | 78.1 | 2.5 | 10 | 120 |
| ∅ 75 | 76.2 ± 1.2 | 94.1 | 2.5 | 10 | 150 |
| ∅ 90 | 89.0 ± 1.6 | 108.4 | 2.0 | 8 | 210 |
| ∅ 100 | 101.6 ± 1.6 | 122.1 | 2.0 | 8 | 240 |
| ∅ 125 | 127.0 ± 1.6 | 149.3 | 2.0 | 8 | 400 |
| ∅ 150 | 152.4 ± 1.6 | 175.6 | 1.5 | 6 | 450 |
| ∅ 200 | 203.0 ± 1.6 | 230.8 | 1.2 | 5 | 1000 |
| ∅ 250 | 250.4 ± 1.6 | 283.4 | 1.0 | 4 | 1500 |